Payment & Shipping Terms:
|Series:||Cisco Small Business||Number Of SFP Port:||2|
|Switching Capacity In Gigabits Per Second (Gbps):||52.0||Number Of Ports That Support PoE:||24|
|Power Dedicated To PoE:||180W|
cisco smb switch,
cisco small office switch
Cisco Small Business SF220-24-K9 Cisco SMB Switch 24port Smart Network Switch
|Model name||Total system ports||RJ-45 ports||Uplink ports|
|SF220-24||24 Fast Ethernet plus 2 Gigabit Ethernet||24 Fast Ethernet||2 Gigabit Ethernet combo|
|Switching Capacity||Model name||Forwarding rate in millions of packets per second (mpps; 64-byte packets)||Switching capacity in Gigabits per second|
|Layer 2 switching|
|MAC table||Up to 8,192 MAC addresses|
|Spanning Tree Protocol (STP)||
Standard 802.1d Spanning Tree support, enabled by default
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])
Multiple Spanning Tree instances using 802.1s (MSTP)
16 instances are supported
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● Up to 8 groups
● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
Load balance based on source and destination MAC address, or source and destination MAC/IP
Support for up to 256 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs
|Auto voice VLAN||Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS|
|QinQ VLAN||VLANs transparently cross a service provider network while isolating traffic among customers|
|Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)||Protocols for automatically propagating and configuring VLANs in a bridged domain|
|Head-Of-Line (HOL) blocking||HOL blocking prevention|
|Jumbo frame||Frame sizes up to 9216 supported|
|Loopback detection||Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.|
|Automatic Media-Dependent Interface Crossover (MDIX)||Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.|
Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag
Support up to 512 rules
|Port security||Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses|
|IEEE 802.1X (authenticator role)||
802.1X: RADIUS authentication; guest VLAN;
Single-host, multiple-host, and multisession mode
|RADIUS, TACACS+||Supports RADIUS and TACACS authentication; switch functions as a client|
|MAC address filtering||Supported|
|Storm control||Broadcast, multicast, and unknown unicast|
|DoS protection||DOS attack prevention|
|STP Bridge Protocol Data Unit (BPDU) Guard||This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port|
|Spanning Tree Loop Guard||This feature provides additional protection against Layer 2 forwarding loops (STP loops).|
|Secure Shell (SSH) Protocol||SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported|
|Secure Sockets Layer (SSL)||SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch|
|Priority levels||8 hardware queues per port|
|Scheduling||Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)|
|Class of service||Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS|
|Rate limiting||Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based|
|Congestion avoidance||A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization|
|Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping||IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups|
|IGMP querier||IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router|
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab
1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE
802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE
802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE
802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC
1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC
2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC
2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC
1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC
2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC
1493, RFC 1215, RFC 3416
IPv6 host mode
IPv6 over Ethernet
IPv6/IPv4 Dual Stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
ICMP version 6
|IPv6 ACL||Drop or rate limit IPv6 packets in hardware|
|IPv6 QoS||Prioritize IPv6 packets in hardware|
|Multicast Listener Discovery (MLD v1/2) Snooping||Deliver IPv6 multicast packets only to the required receivers|
|IPv6 applications||Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, CDP, LLDP|
|IPv6 RFCs supported||
RFC 4443 (which obsoletes RFC2463) - ICMP version 6
RFC 4291 (which obsoletes RFC 3513) - IPv6 address architecture
RFC 4291 - IPv6 addressing architecture
RFC 2460 - IPv6 specification
RFC 4861 (which obsoletes RFC 2461) - Neighbor discovery for IPv6
RFC 4862 (which obsoletes RFC 2462) - IPv6 stateless address auto-configuration
RFC 1981 - Path MTU discovery
RFC 4007 - IPv6 scoped address architecture
RFC 3484 - Default address selection mechanism
1. Why choose us ?
Bo-Net is the leading global supplier of quality networking equipment and we have over 10years experience in this field .
*High quality products and services.
2.What's the quality of the products?
All the items are brand original with full test before shipping .
3.What about warranty ?
We promise the product is original Cisco, tested well before shipment. Guaranteed Non-DOA
1year warranty for new products .
3months warranty for used products .
Lifetime warranty for CISCO small business series.
If you purchase have any working defects during the warranty period we will replace the unit.
4. How to place order ?
We accept many terms of trade, such as T/T, Western Union, Money Gram and PayPal .
5. How about the shipment?
We deliver products by FEDEX, DHL, ARAMEX and TNT, etc. We are also able to deliver goods to your forwarder in China if you need .
6. How about the delivery time?
Goods usually would be shipped out within 2days after receive the payment. Except futures order .
Contact Person: Ms. Sammi